MC 150

Base Price: 109,235.00 NOK*
Base Price: 109,235.00 NOK*

*veiledende pris inkludert mva, eks. klargjøring

SHOW MORE
  • PHO_BIKE_90_RE_GASGAS-2025-MC-150-90-right_#SALL_#AEPI_#V1.jpg
    PHO_BIKE_90_LI_GASGAS-2025-MC-150-90-left_#SALL_#AEPI_#V1.jpg
    PHO_BIKE_PERS_LIHI_GASGAS-2025-MC-150-left-rear_#SALL_#AEPI_#V1.jpg
    PHO_BIKE_PERS_LIVO_GASGAS-2025-MC-150-front-left_#SALL_#AEPI_#V1.jpg
    PHO_BIKE_PERS_REHI_GASGAS-2025-MC-150-left-right_#SALL_#AEPI_#V1.jpg
    PHO_BIKE_PERS_REVO_GASGAS-2025-MC-150-front-right_#SALL_#AEPI_#V1.jpg
At GASGAS, we absolutely love 2-strokes. So, adding our new MC 150 to our 2025 line-up was a no brainer! The motor gives riders a little bit more torque to play with when compared to our class-leading MC 125, and with our engineers knowing a thing or two about building fast dirt bikes, we've got the MC 150 dialed from the get-go. In addition to the motor, WP suspension, strong brakes, a close-ratio 6-speed gearbox, and a perfectly balanced chassis all combine to deliver one thing and one thing only - maximum performance!
  • Choose Colour
  • PHO_BIKE_90_RE_GASGAS-2025-MC-150-90-right_#SALL_#AEPI_#V1.jpg
    PHO_BIKE_90_LI_GASGAS-2025-MC-150-90-left_#SALL_#AEPI_#V1.jpg
    PHO_BIKE_PERS_LIHI_GASGAS-2025-MC-150-left-rear_#SALL_#AEPI_#V1.jpg
    PHO_BIKE_PERS_LIVO_GASGAS-2025-MC-150-front-left_#SALL_#AEPI_#V1.jpg
    PHO_BIKE_PERS_REHI_GASGAS-2025-MC-150-left-right_#SALL_#AEPI_#V1.jpg
    PHO_BIKE_PERS_REVO_GASGAS-2025-MC-150-front-right_#SALL_#AEPI_#V1.jpg
Features & Benefits

STYLE

STYLE

GRAPHICS

All-new graphics spice things up for 2025 with the GASGAS logo emblazoned in black rather than white for a fresh twist. Still red, still durable, and still eye-catching, the distinctive design is applied using IML technology. This means they're applied within the bodywork so your GASGAS will stay looking super fresh for a long, long time, even if you ride in gnarly conditions week after week.

BODYWORK

All red, front to back! Incredibly ergonomic with large contact surfaces to help you grip the bike with your legs, the smooth profile bodywork encourages riders to effortlessly move around on the bike and ride with a perfect technique. There's also a super grippy seat cover, in red of course, to keep you sat exactly where you need to be when you get on the gas!

HANDLEBARS

Get on the gas and hold on tight! Not too tight though as nobody likes arm pump... But to make sure the ride is comfortable, NEKEN handlebars are clamped into redesigned bar mounts (they're more resistant to twisting if you should hit the deck), with lock-on style, medium compound ODI grips fitted to create a comfy set-up to suit all riders.

AIRBOX

Less time working on bikes means more time riding bikes, which is precisely why you'll love the straightforward, no tools and no-nonsense filter mounting system. A strong, one-piece design for the air inlet maximizes airflow and you know what that means... maximum power! Accessing the air filter to inspect or replace it couldn't be easier, either. Simply pop the left side panel off and you'll be inside the airbox in no time.

FUEL TANK

The fuel tank sits neatly inside the vibrant red bodywork and a sturdy rubber tank support underneath helps hold it firmly in place while protecting the frame from wear. With an integrated fuel pump inside the tank allowing for it to be emptied further, long motos around deep sand tracks aren't a problem for this GASGAS!

FOOTPEGS

Bigger is better when it comes to footpegs. That's precisely why they not only have a larger surface area for maximum grip, but we've also made them less likely to catch on the edges of deep ruts, which mean no loss to forward momentum. The pegs are also light and prevent mud from building up. So, no matter how gnarly the track gets, you'll stay in complete control.

Features & Benefits

HANDLING

HANDLING

FRAME

So much testing and development went into designing and building the MC 150 frame. Just like the other GASGAS dirt bikes in our line-up, the frame makes the bike super stable at speed in addition to being able to rail around corners with ease. The frame is complete with a red powder coating and guards with a grippy surface to help you grip the bike and protect the shiny finish.

SUBFRAME

The all-aluminium subframe is light, strong, and works as one with the new frame by helping to centralize mass and contributing massively to the bike's outstanding handling characteristics.

TRIPLE CLAMPS

Forged aluminum triple clamps offer just the right amount of calculated flex thanks to a more forgiving steering stem. The triple clamps align the fork tubes perfectly for a smooth action, which improves front wheel feedback and leads to predictable handling on any track and any terrain. The adjustable bar mounts with the slightly larger contact area against the handlebars reduce the chance of the bars twisting. A glass bead blasted finish means the triple clamps always look as good as new.

WP FORKS

Like every other full size motocross model, the MC 150 is equipped with the latest 48mm WP XACT forks. Easily adjustable by hand on the outside, on the inside, a capsulated air spring and pressurized oil chamber take care of delivering consistent damping. By using an air spring, a customized set-up can be created easily as this bike includes an air pump to adjust the pressure. And, for those who like to go big on the jumps, a hydrostop helps maintain forward momentum by taking the sting out of every heavy landing.

WP SHOCK

Soaking up the biggest of bumps with ease, the WP XACT rear shock offers no less than 300mm of travel. Low friction seals in the linkage lead to unrestricted performance from the shock and a small diameter linkage bolt keeps the overall weight low. The seals and bolt were put to the test in MXGP by Red Bull GASGAS Factory Racing, so you know they'll make a difference on track. Inside the shock, the piston has been designed to ensure maximum comfort and to help the shock stay up a little higher in the stroke, especially under hard acceleration. A customized suspension set-up can be created easily as all adjustments can be made by hand.

SWINGARM

Cast from one piece of aluminum, the swingarm on this GASGAS certainly looks the business! A strong chain slider is incredibly long-lasting, and who doesn't like the sound of that? At the rear of the swingarm you'll find a chain guide with a rounded profile to help it glide over the ground as you lay the bike over through deeply rutted turns. Finally, clear chain adjustment markings make maintenance quick and easy.

Features & Benefits

MOTOR

MOTOR

ELECTRONIC FUEL INJECTION (EFI)  

For 2025, our 2-stroke motors are fuelled using Throttle Body Injection - a 39mm Keihin throttle body, to be precise - which works together with the Engine Contol Unit (ECU) to deliver the perfect mix of fuel and air. The end result? Crisp, clean running motors that create smooth, strong power.

CYLINDER & PISTON

With the introduction of the Electronic Fuel Injection (EFI) on the MC 150, the traditional 2-stroke power valve is replaced with an innovative electronic exhaust control system. Now, the lateral exhaust ports opens slightly faster than the main exhaust port to deliver strong power and maximum reliability.

TRANSMISSION

As the 6-speed gearbox is made by PANKL Racing Systems, you just know that the transmission is as good as it gets in terms of positive gear changes, reliability, and overall quality. The clever lever design helps prevent dirt build-up, too, especially when the ruts get deep and the dirt gets sticky!

CRANKSHAFT

The magic at the heart of the motor and it's low weight means one thing - it builds revs fast! It's also perfectly balanced for minimal vibration and positioned to have the least amount of effect on overall handling.

CRANKCASE

Making sure the weight of the MC 150 is kept to a minimum, the thin and strong crankcases are made using a high-pressure die-cast process. Inside, the motor internals are positioned to centralize mass which leads to next level rideability.

EXHAUST SYSTEM

Designed and developed to be slim thanks to an innovative manufacturing process, the exhaust system complies with FIM sound regulations, looks awesome, and most importantly, delivers the very best performance! The header pipe is shaped for maximum ground clearance and is fitted to a muffler that features a clever internal construction to keep noise to a minimum without sacrificing power.

DIAPHRAGM STEEL (DS) CLUTCH

The MC 150 is equipped with a Diaphragm Steel (DS) clutch, which is robust, super reliable, and contributes to the compact engine design. Inside the clutch basket, which is CNC machined from a single piece of steel for incredible longevity, is the clutch pack that features a single diaphragm steel pressure plate instead of traditional coil springs.

Features & Benefits

PARTS

PARTS

HYDRAULIC BRAKES

Fast is fun but slowing down is essential, which is why all GASGAS dirt bikes are fitted with high quality Braktec calipers and controls. Speaking of controls, a super strong rear brake pedal prevents it from getting bent out of shape in a crash or catching the ground when you're railing through a deep rut. When you combine those Braktec calipers with GASGAS specific brake disks, 260mm up front and 220mm at the rear, the result is amazing braking performance. This all means that all riders can stay on the gas longer and brake later into corners. And you know what that leads to.... faster lap times!

HYDRAULIC CLUTCH

No need for adjustment and offering a near maintenance-free operation, the best thing about the Braktec hydraulic clutch is that it provides consistent action. With free-play at the redesigned lever automatically adjusted, the biting point and function of the clutch remain constant no matter whether the motor is started from cold or used during the heat of a battle.

RADIATORS

Keeping the motor cool is a set of strong aluminum radiators, which channel air through them in the most effective way possible. A large center tube within the frame is used to reduce the number of hoses needed and ensures a consistent flow of coolant around the motor - just what you need when you're battling hard!

WHEELS

Built to take a beating, our wheels are ready to play rough. No matter how heavy the landing or how rough the track is, the silver, CNC machined hubs, lightweight spokes, and high-strength EXCEL rims deliver maximum strength for complete peace of mind.

TIRES

One of the only components carried over from the outgoing generation of GASGAS motocross bikes are the Maxxis MaxxCross MX-ST tires. Need to know why? It's simple. They perform so well on a wide variety of terrain and they're super-durable too. After all, who likes changing tires?

Features & Benefits

ELECTRONICS

ELECTRONICS

ENGINE MANAGEMENT SYSTEM (EMS)

Small, light, and fast at processing data - just what you need from an engine management system! The Vitesco Technologies component is the best in the business and includes a rollover sensor that cuts the ignition during big crashes, as well as feeding information to the hour meter.

MAP SELECT SWITCH

You're going to love the Map Select Switch on the MC 150! By simply pressing a button on the bars you can activate a different power delivery. So, if you're riding on hardpack and slippery tracks where there's minimal traction, we'd suggest leaving map 1, the mellow map, engaged. But, if you're riding on sand or the track is heavy going and you need an aggressive hit of power, activate map 2 and thank us later!

THROTTLE BODY

The MC 150 uses a 39mm Keihin throttle body with its injectors positioned to ensure the most efficient flow of fuel mixture into the combustion chamber. But what's most important to all riders is the fact that the direct cable mounting design ensures instant throttle response.

ELECTRIC STARTER

The best invention since the wheel! With an electric starter fitted, this GASGAS starts super easily every single time you hit that start button. And to simplify things further and save space on the bars, the engine stop button is located in the same housing as the start button. Using a Li-Ion battery, which weighs approx. 1kg less than a conventional lead battery, you get the convenience of electric starting while the overall bike weight is kept to a minimum. It's a win, win for everyone!

Technical Details

Engine

  • Transmission 6-speed
  • Battery capacity 2 Ah
  • Cooling Liquid cooled
  • Starter Electric starter
  • Stroke 54.5 mm
  • Bore 58 mm
  • Clutch DS wet multi-disc clutch, Braktec hydraulics
  • Displacement 143.99 cm³
  • EMS Vitesco Technologies EMS
  • Design 1-cylinder, 2-stroke engine
  • Fuel-mixture generation Keihin EFI, throttle body 39 mm

Chassis

  • Weight (without fuel) 92.8 kg
  • Tank capacity (approx.) 7.9 l
  • Wheelbase 1493 mm
  • Front brake disc diameter 260 mm
  • Rear brake disc diameter 220 mm
  • Chain 520, Non-sealed
  • Frame design Central double-cradle-type 25CrMo4 steel
  • Front suspension WP XACT-USD (AER), Ø 48 mm
  • Ground clearance 354 mm
  • Handlebar Neken, aluminium Ø 28/22 mm
  • Rear suspension WP XACT Monoshock with linkage
  • Seat height 956 mm
  • Silencer Aluminium
  • Steering head angle 63.9 °
  • Rear subframe design Aluminium
  • Suspension travel (front) 310 mm
  • Suspension travel (rear) 300 mm
  • Wheels Spoked wheels with aluminium rims