Motorcycles E-Bicycles Dealer search Configurator Technical Accessories Apparel Racing Get on the brand Experience GASGAS GASGAS TV Enduro Motocross Cross Country Trial Supermoto Travel Electric 2-stroke 4-stroke EC 250 2024 EC 300 2024 EC 250F 2024 EC 350F 2024 EC 450F 2024 EC 500F 2024 Electric 2-stroke 4-stroke MC-E 2 2024 MC-E 3 2024 MC-E 5 2024 MC 50 2024 MC 65 2024 MC 85 17/14 2024 MC 85 19/16 2024 MC 125 2024 MC 250 2024 MC 250F 2024 MC 350F 2024 MC 450F 2024 MC 450F PRADO EDITION 2025 MC 250F Factory Edition 2024 MC 450F Factory Edition 2024 2-stroke 4-stroke EX 250 2024 EX 300 2024 EX 250F 2024 EX 350F 2024 EX 450F 2024 TXT GP TXT RACING TXT GP 250 2024 TXT GP 300 2024 TXT Racing 125 2024 TXT Racing 250 2024 TXT Racing 280 2024 TXT Racing 300 2024 SM 700 2024 ES 700 2024 RX 450F REPLICA 2024 Motocross Electric balance bikes MC-E 2 2024 MC-E 3 2024 MC-E 5 2024 MC-E 1.12 2023 MC-E 1.16 2023 MC-E 1.20 2023 Enduro All Mountain Trail Hardtail Moto G TREKKING Technology Archive ECC ECA G Enduro ECC 6 ECC 5 ECC 4 ECA 3 ECA 1 G ENDURO 3.0 G ENDURO 2.0 G ENDURO 1.0 MXC MXA MXC 6 MXC 5 MXC 4 MXA 3 MXA 1 TRA G Light Trail G Trail TRA SE TRA 6 TRA 5 G LIGHT TRAIL 3.0 G LIGHT TRAIL 2.0 G TRAIL 3.0 G TRAIL 2.0 G TRAIL 1.0 G Cross Country G CROSS COUNTRY 3.0 G CROSS COUNTRY 2.0 G CROSS COUNTRY 1.0 MOTO 2 MOTO 1 G TREKKING 3.0 G TREKKING 2.0 Wave G TREKKING 2.0 History Brand Values Philosophy Milestones News Ambassadors united in dirt gasgas tour the gasgas dirt Trial Guides GASGAS TV

TOUGH NIGHT IN INDY FOR TROY LEE DESIGNS/RED BULL/GASGAS FACTORY RACING TEAM

After enjoying an incredibly successful result in Indianapolis just three days ago, the Troy Lee Designs/Red Bull/GASGAS Factory Racing team returned to Lucas Oil Stadium for the final time on Saturday but it was a mixed day this time around. Justin Barcia delivered top-notch results all day starting with a season-best fifth in qualifying, a heat race victory and a Main Event holeshot that led to a podium finish within grasp before losing it all when another rider collided into him mid-air leaving him to salvage 19th. Teammate Michael Mosiman was poised to have another great night as well, grabbing third in qualifying before suffering a broken hand in the final qualifying session of the day.

  • Barcia tallied his third heat-race win of the season
  • Another Main Event holeshot for Barcia and the MC 450F 
  • Mosiman suffered a broken hand at the end of the final practice session

Coming into Saturday, the Troy Lee Designs/Red Bull/GASGAS Factory Racing team made some changes to Barcia’s bike setup which seemingly paid off as he rode his MC 450F to a season-best fifth in qualifying. In the heat, Barcia jumped into a top-three position off the start and it wasn’t long before he found second. He kept a good pace behind the leader, Marvin Musquin, and he pounced on the chance to take over when Musquin made a mistake, leading the last six laps to claim the heat race win.

In the Main Event, Barcia proved he was hungry right off the start as he clawed his way across the line to the claim the holeshot. He diced up front early on before settling into a solid rhythm in second. He went back-and-forth with Cooper Webb, who finally got around him for second later in the race, only to then fend off defending champ, Eli Tomac, seconds later. Barcia shut down that attempt and staked his claim on third heading into the final laps. With a podium finish in sight, Barcia got tangled up with another rider mid-air and went down hard with only three laps to go. He was able to dust himself off and take the checkered flag in 19th, salvaging a few valuable points toward the overall championship.

Justin Barcia: “The day was going good, I had my best qualifying position with fifth and I felt like we got the bike working really well and I felt really comfortable out there. The Main Event was going good, I was battling for the podium and unfortunately had a lapper come across on me and take me out and that’s pretty much how the night ended. It’s pretty disappointing but onto the next one.”

Coming off two consecutive podium finishes in the 250SX Eastern division, Michael Mosiman’s championship run came to an abrupt halt at Round 6 when he sustained a broken hand at the end of the day’s final practice session. Prior to getting injured Mosiman was in the mix fighting for pole position, ultimately qualifying third overall despite not being able to line up for the night’s racing. The next step for Mosiman will be surgery to repair his broken hand. 

Michael Mosiman: “I made a stupid move at the end of the last practice and I seem to have broken my hand in three places. I qualified third was riding great, looking to get my first win here tonight but looks like it’s going to need surgery so we’re going to do the work necessary and be back out there to battle with the guys. I’m super bummed and disappointed. Thanks to everyone sticking behind me and supporting me, we will be back.”

The Troy Lee Designs/Red Bull/GASGAS Factory Racing team is headed to warmer weather as they gear up for the next two rounds in Orlando, Florida beginning next Saturday, February 13.

Download high-res images from Round 6 of the 2021 AMA Supercross Championship, Indy 3, here. 

Results – 2021 AMA Supercross Championship, Round 6

450SX – Main Event

1. Ken Roczen (Honda) 26 laps; 2. Cooper Webb (KTM) +0.888; 3. Marvin Musquin (KTM) +18.820…19. Justin Barcia (GASGAS)

250SX East – Main Event

1. Christian Craig (Yamaha) 20laps; 2. Jo Shimoda (Kawasaki) +07.560; 3. Colt Nichols (Yamaha) +14.418…DNS Michael Mosiman (GASGAS)

Championship Standings – After Round 6

450SX

1. Ken Roczen (Honda) 138pts; 2. Cooper Webb (KTM) 122; 3. Eli Tomac (Kawasaki)114…5. Justin Barcia (GASGAS) 96

250SX East

1. Colt Nichols (Yamaha) 143pts; 2. Christian Craig (Yamaha) 137; 3. Jo Shimoda (Kawasaki) 119…5. Michael Mosiman (GASGAS) 97